Lanner FW-7565 Manuel d'utilisateur télécharger pdf (Page 41)

Bios Settings

Chapter 4

Network Application Platforms

PS/2 Mouse Support

It lets you enable or disable support for PS/2 mouse.

Wait for ‘F1’ if error

It determines whether the message, “Press F1 to continue”

should be displayed when error occurs during start-up.

Option Description

Enabled When setting to enabled, the system dis-

plays the message, “Press F1 to continue”

and waits for the input. when error occurs

during start-up.

Disabled When setting to Disabled, the system will

not halt the start-up sequence even when

an error is detected.

Hit ‘DEL’ Message Display

When this item is set to Enabled, the system displays the

message , “Press DEL to run Setup” during the start-up

sequence.

Interrupt 19 Capture

Set this value to allow option ROMs such as network

controllers to trap BIOS interrupt 19.

Option Description

Disabled The BIOS prevents option ROMS from trap-

ping interrupt 19.

Enabled The BIOS allows option ROMs to trap inter-

rupt 19.

Boot Device Priority

Use this screen to specify the order in which the system

checks for the device to boot from. To access this screen,

select Boot Device Priority on the Boot Setup screen and

press <Enter>. The following screen is displayed at right:

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Pas de commentaire

Lanner FW-7565 Manuel d'utilisateur Page 41