Lanner LEC-2280 Manuel d'utilisateur télécharger pdf (Page 22)

Hardware Setup

Chapter 4

Embedded and Industrial Computing

Note: To remove the SIM card, slide the card

reader outward to unlock it.

PCI/PCIe Riser Card Installation

The system can accommodate one PCIe expansion (or two

PCI expansion on model P2) module. In order the install

the PCIe expansion module, a low-profile riser card has

to be installed first. Follow these steps to install the riser

card:

Fix the riser card on the bracket with 3 screws.1.

Install the riser card to the system by connecting the 2.

connectors with the system’s PCIEIO1 connector.

Fix the riser card on the board.3.

Connect the PCIe expansion card to the riser.4.

Fix the card holder back to the system.5.

On 2280E with one PCIe slot

Wireless Module Installation

Align the wireless module’s cutout with the Mini-PCIe 1.

slot notch.

Insert the wireless module into the connector 2.

diagonally.

Hold down the other end of the wireless module and 3.

tighten it with the screws.

3G SIM Card Installation

Unlink the SIM card reader first by sliding it outward.1.

Flip the SIM card reader diagonally.2.

Align the cut corner of the SIM card pointing toward 3.

SIM card reader. Make sure the ICs will be in contact

with the SIM card reader.

Insert the 4. SIM card into the reader and close the tray.

You should feel a click when the SIM card is locked

securely in the SIM card reader.

Lock

Unlock

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Lanner LEC-2280 Manuel d'utilisateur Page 22